Parr-instrument 5500 HPCL Manual do Utilizador

1 CAUTION: DISCONNECT ALL ELECTRICAL CONNECTIONS BEFORE PROCEEDING WITH DISASSEMBLY AND ASSEMBLY 1. Disconnect the 1/50HP motor from the

2 ASSEMBLING THE 5500 RETRO-FIT 1. Unscrew the (3) 8-32 x 3/8 BHSCS from the Top Cap (3078HC) to separate the Top Cap from the (3) support rods (

3 5. With ears of bottom cap clear of fittings continue to screw in the retro-fit assembly into the head of the reactor and tighten with the

4 8. Align the holes in the Top Cap (3078HC) with the (3) support rods and install the (3) 8-32 X 3/8 BHSCS with the 3/32” socket screw key pro

5 9. Make sure the bottom cap is seated flat on the ring of the magnetic drive assembly body as shown in picture 4 and tighten the (2) 8-32 x 1/4

6 11. Screw existing motor onto the top cap of retro-fit assembly, aligning the coupling half on the motor with the b

7 12. Check set screw of the coupling on drive adapter and tighten if necessary. With the correct installation of all parts there should be a

8 14. Upon completion of assembling, place reactor in base/stand and connect all electrical connections to tes